FPA600 600w thick film heatsink resistors arcol uk limited, threemilestone ind. estate, truro, cornwall tr4 9lg, uk. t +44 ( 0) 1872 277431 f +44 ( 0) 1872 222002 e sa les @ arcolresistors.com www.arcolresistors.com the information contained herein does not form part of a contract and is subject to change without notice. arcol operate a policy of continual product development therefore, specifcations may change. it is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. if in doubt please ask arcol. ? ? ? ? ? ? ? characteristics specifcations page 1 of 2 2 /12.14 600 watt resistor designed for various applications including power transmission, traction, variable speed drives, power supplies, robotics, motor control and power control devices. suitable for liquid or air cooled heat sink systems power dissipation value range tolerance options tcr options maximum voltage dielectric strength special features 600 watts at max 70c bottom case temp r5 to 100k 5% or 10% 150ppm/c 5000vdc 12000vdc partial discharge 4kvrms <10 pc up to 7kv. please consult with company regarding application areas. vibration proof. very low inductance rohs compliant. power rating resistance range tolerance temperature coeffcient maximum working voltage working temperature range dielectric strength creepage distance partial discharge voltage proof test typical inductance parallel capacitance capacitance / mass short term overload thermal resistance mounting screw / max. torque contacts / max. torque 600w at 70oc effective ambient r5 to 1m 1% (f) - 10% (k) - 5% (j) std 100ppm / oc (25oc - 100oc) 5kv rms -55oc to +150oc 6kv/50hz test time 10sec. 40mm 4kv rms. <10pc 7kv rms. <100nh measured at 100khz 40pf 100pf 1kw - 10 sec. rth 0.115oc/w m4, normal / 1.8nm m5, normal / 2nm short time overload humidity 56 days / 40oc / steady state 95% temperature -55 / +125 / 5 cycling cycles shock 40g / 4,000 times vibrations 2-500hz / 10g load life pn 30 min. on / 1,000cyl 30 min. off 1,000w / 10 sec 0.4% ?r 0.25% ?r 0.20% ?r 0.25% ?r 0.25% ?r 0.40% ww w.arcolresistors.com for more information and ordering, please consult
arcol uk limited, threemilestone ind. estate, truro, cornwall tr4 9lg, uk. t +4 4 (0) 1872 277431 f +4 4 (0) 1872 222002 e s ales @ arcolresistors.com www.arcolresistors.com the information contained herein does not form part of a contract and is subject to change without notice. arcol operate a policy of continual product development therefore, specifcations may change. it is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. if in doubt please ask arcol. page 2 of 2 2 /12.14 FPA600 600w thick film heatsink resistors derating curve dimensions (mm) ordering procedure ?4.1 -0.05 +0.2 standard resistor: specify series, watts, ohmic value, tolerance code. e.g FPA600 10r j other terminal dimensions available, contact arcol for more information series FPA600 ? arcol uk limited, threemilestone ind. estate truro, cornwall, tr4 9lg t +44 (0)1872 277431 f +44 (0)1872 222002 e sales @ arcolresistors.com the information contained herein does not form part of a contract and is subject to change without notice. arcol operate a policy of continual product development, therefore, specifications may change. it is the responsibility of the customer to ensure that the component selected from our range is suitable for the intended application. if in doubt please ask arcol. www.arcolresistors.com fpa 600series25 08.45 ? 600w thick film heatsink resistor ? high power desinty on heatsink ? vibration proof ? low profile ? very low inductance dimensions case temperature (c) rated power % rated power (w) 0 25 50 75 100 125 175 150 0 20 40 60 80 100 120 0 120 240 360 480 600 720 pulse rating for pulse duration >7.5 s and, maximum allowed voltage levels, the maximum peak energy of 0.6j is limited by the average power rating of 600w. for pulse duration times <7.5 s it has not been possible to reliably establish maximum energy failure point, although it is known that the pulse capability is higher than the curve shown in the graph below. whilst these parts are designed to operate in high frequency circuits, where dv/dt is faster than 250v/s, it is recommended that the resistor is tested under worst case application conditions to ensure that unknown attribute of the application waveform are completely accounted for.
|
